Dynamic balancing. In the world of rotating machinery, the most common error is imbalance. Due to the fact that the center of gravity (or centerline of mass) and the center of rotation (or axis of rotation) do not coincide, centrifugal force occurs. This effect burdens the support of the rotating part, the bearings, and their structural elements.
Our Services
- up to four-plane dynamic balancing
- calculation considering up to six different speeds
- high-precision balancing with up to eight sensors simultaneously
- balancing of machines already balanced once without test weights (by applying previously recorded machine-specific parameters)
- radius-dependent distribution and conversion of balancing weights
- weight distribution tailored to screws, fan blades, etc.
- calculation of resultant weights or weight removal (drilling, milling)
- qualification of balancing results (with tolerance chart, qualification report)
As a result of our services, we offer:
- accurate balancing with a qualification certificate
- vibration diagnostic effectiveness check
- intervention or repair suggestions in case of other faults
Advantages of Our Services
- fast, accurate balancing with professional tools based on decades of experience
- reduced bearing load - longer lifespan (up to three times longer operating time)
- savings in repair time and labor (avoidance of overtime and weekend work)
- increased machine availability due to less frequent need for bearing replacement
- lower energy consumption
- vibration diagnostic machine condition check before and after balancing (to avoid unnecessary balancing and verify the effectiveness of the performed balancing)
If during balancing it is determined that further inspections or shaft alignments are necessary, we will perform these immediately upon request. Before every balancing, we examine with vibration diagnostic tools to ensure that the issues are not caused by other machine faults that must be addressed before balancing. We do not perform balancing if its effectiveness is strongly questionable - hence, we do not charge our customers for clearly unnecessary services.
Dynamic Balancing on a Stand
In the world of rotating machinery, the most common error is imbalance. Due to the fact that the center of gravity (or centerline of mass) and the center of rotation (or axis of rotation) do not coincide, centrifugal force occurs. This effect burdens the support of the rotating part, the bearings, and their structural elements.
Our Services
- high-precision multi-plane dynamic balancing
- visual inspection of rotating parts, checking for shaft curvature
- radius-dependent distribution and conversion of balancing weights
- weight distribution tailored to screws, fan blades, etc.
- placement of combined (resultant) weights - minimizing the number of weights
- weight removal-based technologies (drilling, milling)
- qualification of balancing results (with tolerance chart, qualification report)
Advantages of Our Services
- fast, accurate balancing with professional tools based on decades of experience
- reduced bearing load - longer lifespan (up to three times longer operating time)
- savings in repair time and labor (and avoidance of overtime and weekend work)
- increased machine availability due to less frequent need for bearing replacement
- lower energy consumption
- if possible, vibration diagnostic machine condition check before and after balancing (to avoid unnecessary balancing and verify the effectiveness of the performed balancing)
As a result of our services, we offer:
- accurate balancing with a qualification certificate
- vibration diagnostic effectiveness check
- intervention or repair suggestions in case of other faults
We do not perform balancing if its effectiveness - due to shaft curvature, loosened parts, etc. - is strongly questionable, therefore we do not charge our customers for unnecessary services.
Our Professional Background
Our colleagues are highly qualified, experienced vibration diagnostic engineers with VAT1 and VAT2 certifications, as well as machine diagnostic qualifications from Germany and the United States. They have accumulated experience through years of continuous diagnostic activities and also engage in high-level professional training.
Through our outstanding, extensive, and high-quality, proprietary, permanent equipment, we believe we can rightfully claim that our company is one of the most well-equipped and advanced engineering service providers not only in Hungary but also in Europe. We already possess many unique instruments and devices, and we continuously update and expand our instrument park. Check out our current equipment and see for yourself the truth of our statement!
